Vendor: Liqui Moly
Type: Fuel Additive
Price:
6999.00
To be added directly into the fuel tank. For preventive use during every inspection, after repairs to the fuel system, for treating problems or after every JetClean cleaning. To eliminate problems, we recommend mixing the product with the fuel during refueling over approximately 2,000 km. Contents of can are sufficient for max. 70 l of fuel.
Vendor: Liqui Moly
Type: Gun Cleaner
Price:
4650.00
Vendor: Liqui Moly
Type: Gun Cleaner
Price:
6750.00
Silencers that cannot be disassembled: Seal silencer on one side and fill with the cleaner. With normal contamination, empty the silencer halfway after 2 hours, seal tightly on both sides, shake vigorously and empty.
After cleaning, carefully rinse the silencers with water, dry them and preserve them with GUNTEC Gun Oil or GUNTEC Gun Care Spray. In case of very heavy contamination, the time the cleaner is allowed to take effect can be extended up to 24 hours.
For optimal cleaning results we recommend the use of an ultrasonic bath.
Vendor: Liqui Moly
Type: Grease
Price:
5299.00
When cleaning barrels, spray the foam into the barrel from the chamber side. Seal off the filled barrel at the front and position the weapon with the barrel side facing down. After allowing to take effect for 30 – 60 min, the cleaner also removes deposits of copper, tombac and smoke. Then remove the cleaning foam together with the dissolved contaminants from the barrel, e.g. using tow (oakum) or felt cleaners. After cleaning, preserve the barrel with GUNTEC Gun Oil or GUNTEC Gun Care Spray.
Note: Test material compatibility in an inconspicuous place before applying.
Vendor: Liqui Moly
Type: Airconditioner Cleaner
Price:
3999.00
Klima Fresh (Climate Fresh) (Pollen/Bacteria Treatment) 21465
The most cost-effective option is to use LIQUI MOLY Climate Refresh. The spray acts like a cleaning deodorant for cars and can be easily used at home by any vehicle owner.
For correct application, the product is placed in the footwell of the car, the engine is left idling and the air conditioning is set to recirculation. Once the Climate Refresh has been activated, close the windows and leave the car. As the can slowly empties, the spray mist is distributed in the ventilation ducts and in the air conditioning evaporator. The highly effective surfactants dissolve any dirt that has formed there and allow it to drip off via the condensation water. This eliminates unpleasant odors directly at their source.
Within a short time (approx. 10 min.) removes the unpleasant odors that are caused by bacteria and mold in air conditioning systems, ventilation ducts or vehicle interiors. Easy to use - no need to disassembly the pollen or dust filter. Leaves a pleasant, fresh aroma behind.
Vendor: Liqui Moly
Type: Fuel Additive
Price:
4999.00
Vendor: Liqui Moly
Type: Grease
Price:
5299.00
Vendor: Liqui Moly
Type: Grease
Price:
4750.00
Vendor: Liqui Moly
Type: Engine Flush
Price:
1850.00
Optimizes engine performance. Removes deposits in the fuel system, on valves, spark plugs and in the combustion chamber and prevents renewed formation. This also reduces fuel consumption. Protects the entire fuel system from corrosion. Prevents carburetor icing. Cat tested.
80 Millilitres (ML)
Add to fuel in all 4-cycle engines (carburetor and injection system). 80 ml sufficient for 5 to 10 l fuel. Add every time you fill up.
Add to the fuel tank. For the optimum effect, add every time you refuel. Fully compatible with all gasoline grades. 80 ml is sufficient for 5 to 10 liters of fuel.
Vendor: Liqui Moly
Type: Engine Oil
Price:
46500.00
Part # 1061
20 Liter
ACEA E7, A3/B4, API CH-4, API SL, DTFR 15B110 (228.3), MTU Typ 2
Cummins CES 20076, Cummins CES 20077, Mack EO-N, MAN M 3275-1, Renault Trucks RLD-2, Volvo VDS-3
Vendor: Liqui Moly
Type: Engine Oil
Price:
11999.00
Part # 2475
5 Liter
ACEA E7, A3/B4, API CH-4, API SL, DTFR 15B110 (228.3), MTU Typ 2
Cummins CES 20076, Cummins CES 20077, Mack EO-N, MAN M 3275-1, Renault Trucks RLD-2, Volvo VDS-3
Vendor: Liqui Moly
Type: Engine Oil
Price:
4150.00
Part No: 1855
Intended use
All-year oil for gasoline and diesel engines. Tested safe with catalytic converters and turbochargers.
Description
Synthoil High Tech SAE 5W-40 is a fully synthetic, high-performance, low-friction engine oil designed for year-round use in passenger motor vehicle engines. Optimum high-performance for multi-valve and turbocharged engines. The synthetic base oils and high-quality additive components satisfy and greatly exceed the requirements of the most state-of-the-art engine designs.
Properties
Specifications and approvals:
ACEA A3 · ACEA B4 · API CF · API SM
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required: BMW Longlife-98 · MB 229.3 · Porsche A40 · VW 502 00 · VW 505 00
Technical data
Areas of application
Optimum for modern gasoline engines with multi-valve technology and turbocharging. Especially suitable where there are long intervals between oil changes and heavy duty engine requirements.
Application
The operating instructions of the vehicle and engine manufacturers must be followed.
Vendor: Liqui Moly
Type: Engine Flush
Price:
2299.00
Part No: 5200
| Content | 300 ml |
|---|---|
| Application | One 300 ml can is sufficient for engines with oil capacities of up to 5 liters. After adding the product drive as usual for about 200 km, but avoid full-throttle operation. Then change the motor oil and oil filter. Repeat the cleaning process in cases of extreme contamination. Clean the oil screen in the oil sump if necessary. Can be used before each oil change. |
| Package Unit | 6 |
| Pallet Unit | 1848 |
| Additive Type | Oil-Additives |
Vendor: Liqui Moly
Type: Oil additive
Price:
5599.00
Description:
Motor Protect is a synthetic and oil-soluble engine-oil additive which has been developed according to the latest technology for use in modern petrol and diesel engines. The surface active components of this high pressure/anti-wear additive in combination with new friction modifiers reduce mechanical wear and friction by modifying the surfaces.
Properties:
- reduces oil and fuel consumption
- highest thermal stability
- friction and wear reducing
- has a lasting effect
- tested for turbochargers and catalytic converters
- highly economical - increases smooth operation
Areas of application: For petrol and diesel engines. Not suitable for use on motorbikes with wet clutches.
Application:
Motor Protect should be added approximately every 50,000 km during oil changes. One 500 ml can is sufficient for up to 5 litres oil. Reduce the specified oil volume by 500 ml. For the sake of economy, the product should be added during or shortly after oil changes. Motor Protect is compatible with all commercially available mineral-based and syntheticbased engine oils.
Vendor: Liqui Moly
Type: Engine Oil
Price:
14950.00
Intended use
Motor oil for gasoline, diesel and turbocharged engines. Especially suitable where there are long intervals between oil changes and extreme operating conditions.
Description
Super Low Friction Motor Oil MoS2 SAE 15W-50 is a modern, all season, low friction motor oil formulated from selected mineral and synthetic base oils. The high additive content which includes the solid lubricant molybdenum disulphide (MoS2) ensures optimum lubrication under extreme operating conditions and with long periods between oil changes.
Properties
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required: ACEA A3 ∙ ACEA B4 ∙ API SL ∙ API CF
Technical data
Areas of application
Motor oil for gasoline, diesel and turbocharged engines. Especially suitable where there are long intervals between oil changes and extreme operating conditions.
Application
The operating materials instructions of the motor vehicle and engine manufacturer must be followed.
Vendor: Liqui Moly
Type: Engine Oil
Price:
3699.00
Optimum for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value conservation of the engine during long intervals between oil changes and when there are extreme engine requirements.
Low-viscosity high-tech low-friction motor oil with high shear stability. Combined with innovative additive technology and the special Molygen additive. Reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear. The results are savings in fuel and an extended service life for the engine.
| Content | 1 l |
|---|---|
| Oil Type | Synthesis technology |
| Application |
The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially-available motor oils. Optimum effect obtained only when used on its own (i.e. no mixing). |
Vendor: Liqui Moly
Type: Engine Oil
Price:
3099.00
| Content | 4 L |
|---|---|
| Oil Type | Synthese Technologie |
| Application |
The specifications and instructions from the assembly or vehicle manufacturer must be followed! Miscible with all commercially available engine oils. Optimum effectiveness is only possible when the product is used unmixed. |
| Package Unit | 4 |
Vendor: Liqui Moly
Type: Polish
Price:
2199.00
Part No: 1424
Metallic High Gloss Polish evens out light scratches and freshens up the paint surface in a single process and the high gloss is easily restored to mildly weathered and matt paintwork. Metallic High Gloss Polish repels rain and dirt over long periods and increases the paint's resistance to damaging environments.
Description
Due to its special composition, Metallic High Gloss Polish evens out light scratches and freshens up the paint surface in a single process and the high gloss is easily restored to mildly weathered and matt paintwork. Metallic High Gloss Polish repels rain and dirt over long periods and increases the paint's resistance to damaging environments.
Propertise
Techmical Data
Application
Specially developed for metallic paints from new to matt. The original gloss is easily restored to weathered and matt paintwork. Suitable for machine polishing.
Instructions
First, thoroughly clean the surfaces to be polished and dry them carefully. Shake Metallic High Gloss Polish vigorously before use and pour onto a soft rag, polishing cloth or sponge. Apply thinly and evenly to the paint surface using light pressure and circular movements. Only treat one section at a time. Allow Metallic High Gloss Polish to dry until it forms a matt coat. Remove this and polish using a clean, dry cloth. Do not use under direct heat or on warm paint surfaces. Regular application gives the optimum results.
Vendor: Liqui Moly
Type: Engine Flush
Price:
1899.00
Highly effective cleaning fluid. Removes troublesome deposits from inside the engine. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. This allows the clean engine and fresh oil to realize their full potential.
| Description | Highly effective cleaning fluid. Removes troublesome deposits from inside the engine. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. This allows the clean engine and fresh oil to realize their full potential. |
|---|---|
| Content | 80 ml |
| Application |
80 ml (1 can) is sufficient for 0.8 – 2 l of oil. Add to warm motor oil before oil change. Then allow the engine to idle for approx. 10 minutes. With manual transmissions, press the clutch lever several times, holding it for a few seconds each time. Then change the oil and the filter. Compatible with commercially available motor oils. Suitable for use on motorcycles with wet clutches. |
| Package Unit | 24 |
| Pallet Unit | 2880 |
Vendor: Liqui Moly
Type: Coolant
Price:
3750.00
Vendor: Liqui Moly
Type: Engine Oil
Price:
10850.00
Note: No Extra Delivery Charges
Fully synthetic high-performance motor oil. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. That makes a big difference to driving enjoyment! Tested on engines with catalytic converters. Tested on racing machines.
Available pack sizes
4L Canister plastic (Part No. 1685)
Intended use
Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch.
Properties
Specifications and approvals:
ACEA A3 ∙ API SM ∙ JASO MA2
Technical data
Areas of application
Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch.
Application
The operating instructions of the engine manufacturers must be followed.
Vendor: Liqui Moly
Type: Coolant
Price:
2399.00
Part No. 1381
Intended use
Used for all cooling systems and engines, particularly aluminum high-performance engines in cars, commercial vehicles, buses, agricultural machines as well as stationary engines and equipment.
Description
Radiator antifreeze RAF 12 Plus is a combination of active agents based on ethylene glycol with an ingenious OAT inhibitor formulation which has been specially developed for modern aluminum, high-performance engines. Radiator antifreeze RAF 12 Plus provides outstanding protection against frost, corro- sion and overheating and does not contain amines, nitrites, phosphates, borates or silicates. Adding the correct amount to the water provides reliable vehicle performance all year round.
LIQUI MOLY recommends this radiator antifreeze for vehicles that require a product with the following manufacturers’ approvals:
Properties
Technical data
Areas of application
Used for all cooling systems and engines, particularly aluminum high-performance engines in cars, commercial vehicles, buses, agricultural machines as well as stationary engines and equipment that require a radiator antifreeze of this quality.
Application
Clean cooling system with LIQUI MOLY radiator cleaner; part no. 3320. Then drain cooling system, flush thoroughly with water and fill with RAF 12 Plus radiator antifreeze and water in accordance with the mixture table. Disposal according to the local regulations. Change interval according to manufacturer's instructions. Only store in original state (undiluted). RAF 12 Plus radiator antifreeze is miscible and compatible with silicate-free antifreeze protectants from the original products in accordance with the VW specification TL 774-D/F (LIQUI MOLY long-life radiator antifreeze GTL 12 Plus) or with antifreeze protectants that contain silicates from the original products in accordance with the VW specification TL 774-C (LIQUI MOLY radiator antifreeze RAF 11 or LIQUI MOLY long-life radiator antifreeze GTL 11).
Vendor: Liqui Moly
Type: Coolant
Price:
1899.00
Description:
Radiator antifreeze RAF 11 is an ingenious combination of active agents which is formulated using a selection of inhibitors to provide outstanding protection against frost, corrosion and overheating. Radiator antifreeze RAF 11 is an amine-, nitrite- and phosphatefree radiator antifreeze based on ethylene glycol. Adding the correct amount to the coolant water provides reliable vehicle performance all year round.
Properties:
- outstanding corrosion protection
- prevents the cooling system from freezing up
- provides outstanding protection against overheating
- prevents operational malfunctions
Areas of application:
Used for all cooling systems and engines (including aluminum engines) in cars, commercial vehicles, buses, agricultural machines as well as stationary engines and equipment that require a radiator antifreeze of this quality.
Application:
Clean cooling system with LIQUI MOLY radiator cleaner; part no. 3320. Then drain cooling system, flush thoroughly with water and fill with RAF 11 radiator antifreeze and water in accordance with the mixture table. Disposal according to the local regulations. Change interval according to manufacturer's instructions. Only store in original state (undiluted). RAF 11 radiator antifreeze is miscible and compatible with antifreeze protectants that contain silicates with the quality VW designation G 11, VW specification TL 774- C (LIQUI MOLY long-life radiator antifreeze GTL 11) and with silicate-free antifreeze protectants from the original products in accordance with the VW specification TL 774-D/F (LIQUI MOLY radiator antifreeze RAF 12 Plus or LIQUI MOLY long-life radiator antifreeze GTL 12 Plus).
Vendor: Liqui Moly
Type: Engine Oil
Price:
17499.00
| Description |
Modern premium low-friction motor oil. Suitable for all gasoline and diesel engines with and without diesel particulate filter (DPF) and turbocharger. The combination of fully synthetic base oils and special additives provides ideal protection against wear and reduces oil and fuel consumption while ensuring fast oil penetration of the engine. Oil change intervals of up to 40,000 km are thus possible, depending on the manufacturer's specifications. Also outstandingly suitable for use in gas-driven passenger cars (CNG/LPG). |
|---|---|
| Content | 4 l |
| Oil Type | vollsynthetisch |
| Application | The specifications and instructions from the assembly or vehicle manufacturer must be followed. Optimum effectiveness is only possible when the product is used unmixed. |
| Package Unit | 4 |
| Pallet Unit | 180 |
Vendor: Liqui Moly
Type: Engine Oil
Price:
11850.00
| Content | 4 L |
|---|---|
| Oil Type | Synthese Technologie |
| Application |
The specifications and instructions from the assembly or vehicle manufacturer must be followed! Miscible with all commercially available engine oils. Optimum effectiveness is only possible when the product is used unmixed. |
| Package Unit | 4 |